ECOFLOW Delta 2 Portable Power Station - 1024Wh LiFePO4 Battery (5 Years Warranty)


$30 per week, a total price of $1,440. Delivery to your door after 48 successful payments!
Apply now
100% Traditional Laybuy. Delivery after full payment.
Attention, eager beaver! Need your delivery in a flash?
No worries, mate! We're here to save the day! Just give us an email let us know if you would like to pay more or less each week. Rest assured, we'll also provide you with an estimated delivery date when we make these changes. So don't you worry, your delivery dreams are in safe hands!


- This flashlight is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the flashlight directly into anyone's eyes.
- All information provided in this manual is subject to change without prior notice.

Warranty: 5-Years Free Repair Warranty (Battery for 1 year)!

The Fenix E12 V2.0 is an ultra-compact EDC flashlight. Powered by a single AA battery, the lightweight Fenix E12 V2.0 flashlight has a maximum output of 160 lumens and can throw a beam up to 68 meters to meet your lighting needs. This exquisite flashlight is finely made of durable A6061-T6 aluminum, and the ultrathin optical lens is processed with the same coating as automobile lights. Battery power will not be consumed in standby status, which provides sufficient power for each use. Additional highlights include two-position body clip, tail standing capability and IP68 rated protection. Whether you're on the job or on the go, the Fenix E12 V2.0 ultra-compact flashlight is there to light the way. It is the perfect hybrid of size and functionality.

Size: Length: 3.06" (77.72 mm) x Head: 0.75" (19mm) x Body 0.69" (17.53 mm)
Weight:0.96 oz / 27.3g (excluding batteries)
Battery Type:One AA battery


- 160 lumens maximum output, 68 meters maximum beam distance.
- Uses MATCH CA18 cool white LED with a lifespan of 50,000 hours.
- Included by a single AA battery, easy to find.
- Automobile ultrathin optical lens coating process.
- No standby current, safe and cost-efficient.
- One-handed operation with the single tail switch.
- Two-position body clip and tail standing capability for varying conditions.
- Made of durable A6061-T6 aluminum.
- Premium type HAIII hard-anodized anti-abrasive finish.

Operating Instructions:

On/off for the E12 V2.0 AA Flashlight: Fully press the tail switch to turn on/off the light.

Output Selection: With the light switched on, tap the tail switch to cycle through Low, Med, High.

Intelligent Memory Circuit: The light does not memorize the previously used output level, each time it is turned on, Low mode will be activated.

Battery Specifications

Battery Replacement: Unscrew the light tail and insert the battery with the anode side (+) towards the light head, then screw the light tailback on.

Low-voltage Warning: When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Low output is reached. To ensure normal use, the flashlight will not turn off automatically and will work till the battery runs out completely.

Usage and Maintenance:

- Disassembling the sealed head can cause damage to the light and will void the warranty.
- Fenix recommends using an excellent quality battery.
- If the light will not be used for an extended period, remove the battery, or the light could be damaged by electrolyte leakage or battery explosion.
- Unscrew the tail cap half a turn or take out the battery to prevent accidental activation during storage or transportation.
- Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare.
- Periodic cleaning of the battery contacts improves the lamp's performance as dirty contacts may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following reasons:

A: The battery needs replacing.
Solution: Replace battery (Ensure batteryis inserted according to the manufacturer'sspecifications).

B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

class="np_hidden np_toggle_np2 mt-4">

Output Lumens

Low: 5
Medium: 30
High: 160


Low: 70H
Medium: 13H
High: 1H


Low: 39ft
Medium: 92ft
High: 223ft


Low: 31cd
Medium: 185cd
High: 1133cd


IP68 Up tp 2M


Length: 3.06" (76.6mm)
Body: 0.69" (17.6mm)
Head: 0.75" (19mm)


One Included AA Battery


0.96 oz. (27.3g) excluding battery


AA Battery
Spare O-Ring

We can only process ONE order per customer at a time.

* Term:

$30 per week, a total price of $1,440. Delivery to your door after 48 successful payments!

Why Layaway Depot

Why Layaway Depot?

Here at Layaway our customers are #1. We are committed to serving our customers with a smile and offering the best quality products in the market. With over 50,000 orders placed throughout New Zealand, Layaway has become a market leader in our nearly 10 years of operation. Not only is Layaway well known and trusted in communities around New Zealand, we also offer many amazing benefits that sets us apart from our competitors… this includes NO credit checks, NO interest payments, NO default fees, and NO management charges. You know your in good hands with Layaway Depot, its the easy way to own.

Customer Reviews

Be the first to write a review

Recently viewed