Teltonika RUTX10 Industrial Router with BLE

RUTX10

The RUTX10 is Teltonika’s next-generation enterprise router, featuring Dual Band WiFi 5 (802.11ac) and a Bluetooth LE module. It is ideal for small office or public sector applications, offering high-speed WiFi connectivity that facilitates the transition to an all-wireless office environment.

We designed the RUTX10 specifically for small to mid-sized office applications. Its Dual Band WiFi 5 (802.11ac) provides high data transmission rates and a lag-free browsing experience. The RUTX10 incorporates the latest security features and enables remote monitoring and control of office data usage.

The RUTX10's core is powered by RutOS, a highly customizable operating system. However, it is the synergy between its hardware and software that makes this device a top performer in enterprise solutions. The Quad-Core ARM Cortex A7 717 MHz CPU is more than sufficient for VPN functionality, and if additional features are required, the 256 MB Flash memory allows for the installation of extra protocols.

ETHERNET

• WAN

  • 1x WAN port (configurable as LAN) 10/100/1000 Mbps, compliant with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover.

• LAN

  • 3x LAN ports, 10/100/1000 Mbps, compliant with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover.

WIRELESS

• Wireless Mode

  • 802.11ac (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA).

• WiFi Security

  • WPA2-Enterprise-PEAP, WPA2-PSK, WPA-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation.

• ESSID

  • ESSID stealth mode.

• Wireless Hotspot

  • Captive portal (Hotspot), internal/external Radius server, built-in customizable landing page.

BLUETOOTH

• Bluetooth LE
  • Bluetooth Low Energy (LE) for short-range communication.

NETWORK

• Routing

  • Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP).

• Network Protocols

  • TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL).

• VoIP Passthrough Support

  • H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets.

• Connection Monitoring

  • Ping Reboot, Wget Reboot, Periodic Reboot, LCP, and ICMP for link inspection.

• Firewall

  • Port forwards, traffic rules, custom rules.

• DHCP

  • Static and dynamic IP allocation, DHCP Relay, Relayd.

• QoS

  • Traffic priority queuing by source/destination (planned), service (planned), protocol or port (planned), WMM, 802.11e.

• DDNS

  • Support for over 25 service providers, with others configurable manually.

• Network Backup

  • VRRP, Wired and WiFi WAN options, each with automatic failover capabilities.

• SSHFS (Optional)

  • Ability to mount a remote file system via SSH protocol (not available in standard firmware).

SECURITY

• Authentication

  • Pre-shared key, digital certificates, X.509 certificates.

• Firewall

  • Pre-configured firewall rules via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T.

• Attack Prevention

  • DDoS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks).

• VLAN

  • Port-based and tag-based VLAN separation.

• Web Filter

  • Blacklist for blocking unwanted websites, whitelist for specifying allowed sites only.

• Access Control

  • Flexible access control of TCP, UDP, ICMP packets, MAC address filter.

VPN

• OpenVPN

  • Supports multiple clients and a server running simultaneously, with 12 encryption methods.

• OpenVPN Encryption

  • DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC.

• IPsec

  • IKEv1, IKEv2, with 5 encryption methods (DES, 3DES, AES128, AES192, AES256).

• GRE

  • GRE tunnel.

• PPTP, L2TP

  • Client/Server instances can run simultaneously.

• Stunnel

  • Proxy designed to add TLS encryption functionality to existing clients and servers without changes in the program's code.

• DMVPN

  • Method for building scalable IPsec VPNs.

• SSTP

  • SSTP client instance support.

MODBUS

• Modbus TCP Slave

  • ID range 1-255.

• Modbus TCP Master

  • Supported functions: 01, 02, 03, 04, 05, 06, 15, 16.
  • Supported data formats: 8 bit (INT, UINT); 16 bit (INT, UINT, MSB or LSB first); 32 bit float (Big endian, Big endian with byte-swapped, Little endian, Little endian with byte-swapped).

MONITORING & MANAGEMENT

• Web UI

  • HTTP/HTTPS, status, configuration, firmware update, CLI, troubleshooting, event log, system log, kernel log.

• FOTA

  • Firmware update from server, automatic notification.

• SSH

  • SSH (v1, v2).

• TR-069

  • OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem.

• SNMP

  • SNMP (v1, v2, v3), SNMP trap.

• MQTT

  • MQTT Broker, MQTT publisher.

• JSON-RPC (Planned)

  • Management API over HTTP/HTTPS.

• RMS

  • Teltonika Remote Management System (RMS).

SYSTEM CHARACTERISTICS

• CPU

  • Quad-core ARM Cortex A7, 717 MHz.

• RAM

  • 256 MB, DDR3.

• Flash Memory

  • 256 MB SPI Flash.

FIRMWARE / CONFIGURATION

• Web UI

  • Update firmware from file, check firmware on server, configuration profiles, configuration backup.

• FOTA

  • Update firmware/configuration from server.

• RMS

  • Update firmware/configuration for multiple devices simultaneously.

• Keep Settings

  • Update firmware without losing current configuration.

FIRMWARE CUSTOMIZATION

• Operating System

  • RutOS (OpenWrt-based Linux OS).

• Supported Languages

  • Busybox shell, Lua, C, C++.
  • Development tools SDK package with build environment provided.

USB

• Data Rate

  • USB 2.0.

• Applications

  • Samba share, custom scripts (planned).

• External Devices

  • Possibility to connect external HDD, flash drive, additional modem, printer (planned).

• Storage Formats

  • FAT, FAT32, NTFS.

INPUT/OUTPUT

• Input

  • 1x Digital Input.

• Output

  • 1x Digital Output.

• Events

  • SMS, Email, RMS.

POWER

• Connector

  • 4-pin industrial DC power socket.

• Input Voltage Range

  • 9 - 50 VDC, reverse polarity protection, voltage surge/transient protection.

• PoE (Passive)

  • Passive PoE. Power can be supplied through the LAN port; not compatible with IEEE802.3af and 802.3at standards.

• Power Consumption

  • 11 W Max.

PHYSICAL INTERFACES (PORTS, LEDs, BUTTONS)

• Ethernet

  • 4x RJ45 ports, 10/100/1000 Mbps.

• I/Os

  • 1 Digital Input, 1 Digital Output on 4-pin power connector.

• Status LEDs

  • 8x LAN status LEDs, 1x Power LED, 2.4G and 5G WiFi LEDs.

• Power

  • 4-pin DC connector.

• Antennas

  • 2x RP-SMA for WiFi, 1x RP-SMA for Bluetooth.

• USB

  • USB A port for external devices.

• Reset

  • Factory reset button.

PHYSICAL SPECIFICATION

• Casing Material

  • Full aluminum housing.