Skip to content
Bluetti AC60P Portable IP67 Power Station Capacity 504 WH AC Output 600w, Surge (1200W) Expandable Battery , 1* USB-C 100W, 2* USB A Port, 1* 15W Wireless Charging, 200W Solar Input
Add multiple items to your order — pay just $25/week total, no matter how many items. One contract, one payment, items delivered as you pay them off.
Browse more items →100% Traditional Layby. Delivery after full payment.
Attention, eager beaver! Need your delivery in a flash?
No worries, mate! We're here to save the day! Just give us an email atand let us know if you would like to pay more or less each week. Rest assured, we'll also provide you with an estimated delivery date when we make these changes. So don't you worry, your delivery dreams are in safe hands!
Warning:
- Do place this headlamp in the reach of children!
- Do NOT shine the headlamp directly into the eyes of anyone!
- Do NOT shine flammable objects at close range, to avoid burning objects or causing danger due to high temperature!
- Do NOT use the headlamp in inappropriate ways such as biting in the mouth, to avoid personal injury or life threats when the headlamp or internal battery fails!
- This headlamp will accumulate a lot of heat while working, resulting in a high temperature of the headlamp shell. Pay attention to safe use to avoid scalding.
- Turn off and lock the headlamp or remove the battery from the headlamp to prevent accidental activation when the headlamp is placed in a closed and flammable environment such as pockets and backpacks!
- The LED of this headlamp is not replaceable; so the whole headlamp should be replaced when the LED reaches the end of its life.
Warranty: 5-Years Free Repair Warranty (Battery for 1 year)!
The Fenix HM65R-DT rechargeable headlamp is specifically designed for trail running. This new Fenix headlamp is made of ultra-lightweight magenesium material. The two built-in LEDs give the HM65R-DT a max output of 1500 lumens. With a brand new body designed from magnesium, the Fenix HM65R-DT headlamp has IP68-rated protection, and 2 meters of impact resistance. The included perforated headband provides comfort and adjustability for a perfect fit in every situation. It id recommended to use the Fenix HM65R-DT for trail running trips where you need to light your path swiftly and hands-free.
PRODUCT FEATURES:
- 1300 lumens white light and 400 lumens warm white light. The maximum output of the combined light sources can reach up to 1500 lumens.
- Uses Luminus SST40 white and SST20 warm white LEDs, with a lifespan of 50,000 hours.
- Included a 3400mAh battery.
- Constant current circuit ensures longer runtime.
- Reverse polarity protection, to protect from improper battery insertion.
- Dual top switches for easy and fast operation.
- USB Type-C charging port fast charging.
- Single-handed operation with the new SPORT Headband Fit System.
- Lightweight magnesium alloy material made.
- Size: 3.15'' ? 1.85'' 1.54'' / 80 ? 47 ? 39 mm.
- Weight: 3.21 oz / 91 g (excluding battery).
Operating Instructions
Switches
- White light:for on/off, mode switching, lockout function and output selection on white light mode.
- Warm white light:for on/off, mode switching, lockout function and output selection on warm white light mode.
On/off
Press and hold either of the two switches for 0.5 seconds to turn on/off the lamp. Low output level is set by default.
Mode switching
Press and hold either of the two switches for 0.5 seconds to reach the corresponding mode. The two modes are separately controlled.
Output selection
- White light mode: single click the white light switch to cycle through Low?Med?High.
- Warm white light mode: single click the warm white light switch to cycle through Low?Med?High.
Lockout Function
- Lock:With the lamp switched off, press and hold either of the two switches, or simultaneously press the two switches for 3 seconds, the lamp will blink 4 times on Low of warm white light mode to indicate locked status.
- Unlock: With the lamp is locked, simultaneously press the two switches for 3 seconds, the lamp will be activated with 4 blinks and activates on Low of warm white light mode.
In locked status, clicking or pressing the switches will activate 4 blinks on Low of warm white light mode to indicate locked status.
*18650 Li-ion batteries are powerful cells designed for commercial applications and must be treated with caution and handled with care. Only use quality batteries with circuit protection will reduce the potential for combustion or explosion; but cell damage or short circuiting are potential risks the user assumes.
Quality Li-ion battery with protective circuit will reduce risks. Fenix ARB-L18 Series battery is recommended.
Battery Replacement
Unscrew the battery cover counter-clockwise to insert the battery with the anode side (+) towards the inner side, then screw the battery cover back on.
Charging:
1, Uncover the anti-dust cap and plug the USB Type-C side of the charging cable into the charging port of the lamp.
2, The normal charging time of the Fenix ARB-L18-3400 rechargeable battery is about 3 hours with the lamp being switched off. When charging, Low output of white light or warm white light mode can be separately selected. The headlamp will not automatically power on after full charging.
3, When charging, the charging indicators will flash from rear to front to display charging status. In charging process, four indicators flash: below 20%, one constant-on and three flash: 20% - 50%, two constant-on and two flash: 50% - 80%, three constant-on and one flashes: 80% - 95%, four constant-on: charging complete.
4, Replace the anti-dust cap to ensure waterproof and dustproof ability.
Battery Level Indication
- With the lamp is switched off, single click either of the two switches to check the battery status, the indicator(s) will last for 3 seconds.
- There will be no response with the lamp locked.
- Four lights on: 100% - 80%
- Three lights on: 80% - 60%
- Two lights on: 60% - 40%
- One light on: 40% - 20%
- One light flashes: 20% - 1%
Note: This only works with Fenix ARB-L18 Series rechargeable battery.
Intelligent Overheat Protection
The lamp will accumulate a lot of heat when used on high, med and low output levels for extended periods. When the lamp reaches a temperature of 65°C or above, the lamp will automatically step down a few lumens to reduce the temperature. When the temperature drops below 65°C, it will then allow the user for the reselection of the modes.
Low-voltage Warning
When the voltage level drops below the preset level, the headlamp is programmed to downshift to a lower brightness level until Low output is reached. When this happens in Low output mode, one of the battery level indicators blinks to remind you to timely recharge or replace the battery.
Note: This only works with Fenix ARB-L18 Series rechargeable battery.
Headband Assembly
Notice: The headband is factory assembled by default.
Press the rotary press-pull dial, rotate it clockwise to shorten the headband; pull the dial up to loosen the headband.
Usage and Maintenance
- Disassembling the sealed head can cause damage to the lamp and will void the warranty.
- Fenix recommends using an excellent quality Fenix battery.
- If the lamp will not be used for an extended period, remove the battery, or the lamp could be damaged by electrolyte leakage.
- Lock the lamp or take out the battery to prevent accidental activation during storage or transportation.
- Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare.
- Periodic cleaning of the battery contacts improves the lamp's performance as dirty contacts may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following reasons:
A: Poor battery level.
Solution: Rehcarge or replace the battery.
B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
Size 3.15'' × 1.85'' × 1.54'' / 80 × 47 × 39 mm
Weight 3.21 oz / 91 g (excluding battery)
Battery Type Included one rechargeable 3400mAh Li-ion battery/2 x CR123A battery
We can only process ONE order per customer at a time.
Layby with Layaway Depot
Choose your purchase
Browse our huge Layby only product range. Tap 'Customise Layby plan' to add item to cart.
Set your payment plan
The Mini Cart lets you customise your payment plan. Choose the plan length, and a payment frequency that suits you. You can Layby one item or place multiple items in one plan. You can have multiple plans, but need to log out and in again to create each extra one.
Checkout, make first payment
Review your payment plan, head to checkout and confirm your order. Make your first payment and you're buying the budget-friendly way.
Keep track on your dashboard
Your dashboard is a snapshot of your Layaway Depot account. You can track payments, check orders, adjust settings, get updates and more.
Complete plan, receive your order!
When your final payment has been processed, we quickly ship your product to you. Despatch will occur as close as possible to the date estimated when you customised your plan.
Delivery
All our stock is held in local warehouses in New Zealand.
Layaway Depot will usually dispatch your goods within 7 - 21 business days of completing your Layby payments.
This time frame factors in the confirmation of the Layby order include your payment method, processing and dispatch from the warehouse and the transport of the items via couriers. The 'In Stock' status on our website can mean the stock is either in our warehouse, or available with our supplier.
Whilst we endeavour to get items delivered to you as soon as possible we do, however, need to allow that 7 - 21 business day window to accommodate the processes above.
Delivery tracking details will be emailed to the email address on the account as soon as they are known. Your goods must be delivered to the delivery address as shown on your initial order.
Deliveries require a signature on delivery and if no one is at the property to sign for the package a calling card will be left by the driver with details of how to arrange redelivery or collection.
If their are multiple items on your order, you may receive multiple deliveries shipped by multiple couriers since items may be sent from different warehouse locations.
Large/bulky items (eg furniture and whitegoods) may take longer to deliver and may also incur an additional freight fee. If an additional freight fee is expected for your order you will be contacted via email after the order has been successfully placed.
Find out more →Returns
We guarantee your satisfaction with all Layaway Depot merchandise. If you receive damaged, defective, or incorrect item(s), you may return the product(s) at no cost to you. Once we receive the item(s) and verify the return of product(s), we will send you a replacement or issue you a full refund, including shipping and handling.
Please choose carefully when ordering. Once you have ordered the item, you are committed to the purchase. Under the Consumer Guarantees Act, you are only entitled to a refund in the event of a major product failure - not if you simply change your mind or you later discover that you picked the wrong colour or the item doesn't fit.
You are entitled to a refund if the item you purchased is: not of acceptable quality, does not match the description, does not match the sample or demonstration model shown to you or for any other reason permitted under the Consumer Guarantees Act.
Please contact our customer service department at admin@layawaydepot.co.nz to lodge a return.
You may also like...
